What's in this Guide
This guide provides information about:
n Unpacking
n Physical features
n Installation
n Configuration and system administration
n Telnet API for third-party control
n Specifications
n Troubleshooting and maintenance
n Warranty
For your convenience, most of this information is also available in smaller, limited-purpose manuals:
n Installation Guide for the OneLINK HDMI Camera Extension – Unpacking, physical features,
installation, and initial power-on.
n Configuration and Administration Guide for the OneLINK HDMI Camera Extension – Physical
features, web interface for device configuration and system administration, and troubleshooting.
Download manuals, dimensional drawings, and other information from support.vaddio.com.
Features
n Simple, fast, clutter-free camera installation– power, control, video, and network connectivity on a
single Cat-5e(or better)cable
n Extends installation distance for HDMI and HDBaseT™ cameras up to 100 m (328 ft.)
n Passes uncompressed HDMI
®
video up to 2160p/29.97
n Bidirectional control via Ethernet and RS-232
n Compatible with Vaddio HDBaseT cameras – no EZCamera Interface Module (EZIM) needed
n Compatible with RoboSHOT HDMI and other HDMI cameras
n Available in system configurations with Vaddio cameras
n Kits available for use with Polycom and Cisco codecs and other HDMI cameras
2
Integrator's Complete Guide to the OneLINK HDMI Camera Extension
To Next Page
Loading...
