version
Returns the current firmware version of the OneLINK device.
Synopsis version
Example
version
Returns current firmware version information in a form something like
this:
Commit 9116ca13deff8990088d5ef9fa40903c094da1bb
HDLink RX4.6.1*0.04-TX4.6.1*0.03
System Version OneLINK HDMI 1.0.1
OK
>
history
Returns the most recently issued commands from the current Telnet session. Since many of the programs
read user input a line at a time, the command history is used to keep track of these lines and recall historic
information.
Synopsis history <limit>
Options <limit> Integer value specifying the maximum number
of commands to return.
Examples
history
Displays the current command buffer.
history 5
Sets the history command buffer to remember the last 5 unique entries.
Additional
information
You can navigate the command history using the up and down arrow keys.
This command supports the expansion functionality from which previous
commands can be recalled from within a single session. History expansion is
performed immediately after a complete line is read.
Examples of history expansion:
* !! Substitute the last command line.
* !4 Substitute the 4th command line (absolute as per ’history’ command)
* !-3 Substitute the command line entered 3 lines before (relative)
help
Displays an overview of the CLI syntax.
Synopsis help
Example
help
62
Integrator's Complete Guide to the OneLINK HDMI Camera Extension
To Next Page
Loading...
