VADDIO OneLINK HDMI - Onelink HDMI for HDMI Cameras Used with Codecs

OneLINK HDMI for HDMI Cameras Used with Codecs
OneLINK HDMI for Polycom Cameras with Polycom Codecs, 999-9520-000/001/009
Camera and codec not included.
n OneLINK HDMI Receiver
n OneLINK EZCamera Interface Module (EZIM)
n Power supply, 48 VDC/1.36 A, with AC cord set(s)
n Wall mount with mounting hardware for Polycom codec
and camera
n Fan-out cable, EZIM side, 1 ft. (0.3 m)
n Fan-out cable, codec side, 2 ft. (0.6 m)
n 3-position Euro-style connector, 5 mm
n EZCamera RS-232 control adapter 998-1001-232
n Quick-Start Guide
OneLINK HDMI for RoboSHOT HDMI with Polycom
Codecs, 999-9540-000/001/009
Camera and codec not included.
n OneLINK HDMI Receiver
n OneLINK EZCamera Interface Module (EZIM), with
mounting screws
n Power supply, 48 VDC/1.36 A, with AC cord set(s)
n Fan-out cable, codec side, 2 ft. (0.6 m)
n 3-position Euro-style connector, 5 mm
n HDMI cable, 1 ft. (0.3 m)
n Power cable EIAJ-04 to EIAJ-04, 1 ft. (0.3 m)
n Cat-5e patch cable, 1 ft. (0.3 m), qty. 2
n Quick-Start Guide 411-0019-02
5
Integrator's Complete Guide to the OneLINK HDMI Camera Extension