Powering Up the Equipment
Power up the connected equipment that is not powered by the OneLINK device (such as displays and third-
party control devices), then connect power to the OneLINK device. The connected camera and the
OneLINK device power up together.
Configuration and Administration Tasks
The OneLINK HDMI camera extension provides a web interface to allow configuration and administration
using a browser.
The web interface allows password-protected access to tasks such as setting passwords, changing the IP
address, viewing diagnostics, and installing firmware updates.
Note
The OneLINK device is not a camera control device. To configure or operate the camera, use the camera's
web interface. Refer to the camera's documentation for details.
Note
The connected camera is configured separately from the OneLINK device. Changes to the OneLINK
device's configuration do not affect the configuration of the camera or other connected equipment. If you
need to change the way the camera is configured, log in to the camera's web interface.
Compatible Web Browsers
We have tested this product with these web browsers:
n Chrome®
n Firefox®
n Microsoft® Internet Explorer®
n Safari®
We test using the browser version available from the vendor at that time. Older versions of these browsers
are likely to work, and other browsers may also work.
46
Integrator's Complete Guide to the OneLINK HDMI Camera Extension
To Next Page
Loading...