1011
Model Code Page
67. Powered front axle Carraro
1. 10. 1999
8450--8950 670 3
Special tools
Ordering no. Description
ETV 893 490 Socket spanner for bevel pinion shaft nut (also Carraro 505---905)
ETV 894 460 Plate to fit hub cassette seal (new)
ETV 893 450 Tool to adjust bevel pinion shaft position, which incl.:
ETV 893 451, Measuring rod (1 pcs) (also Carraro 505---905)
ETV 893 452, Screw M10x100 (1 pcs) (also Carraro 505---905)
ETV 893 453, Compression plate (2 pcs) (also Carraro 505---905)
ETV 893 454, Nut M10 (1 pcs) (also Carraro 505---905)
Note! Vari ous bearings and bearing races can be removed by using a drift and a s uitable puller. Fitting can be done with
sleeves or plates o f suitable dimensions. Bearings can be warmed or cooled acco rding to the fitting. Drive shaft seals can be
fitted with plates or sleeves o f c o rrec t dimensions. Some earlier ValtraValmet ETV---sleeves and --- plates can be used when
repairing this axle.
ETV 894 460ETV 893 490
ETV 893 450
ETV 893 451
ETV 893 452
ETV 893 454
ETV 893 453
To Next Page
Loading...
