Vanguard Instruments ATRT-03 - Figure 14-1. Start-Up Menu; Start-Up Menu

Model ATRT-03 (v) Operating Instruction
27
14-1. Start-Up Menu
1.TEST XFMR 04/12/00
2.SETUP 13:06:02
3.CALCULATOR
4.DIAGNOSTIC
Figure 14-1. Start-up Menu
a. Description: The “Start-Up” menu allows the user test a transformer, set-up time, select
computer interface, or use a calculator to manually enter voltage data for transformer turns-ratio
calculation and run diagnostics on the unit.
b. Origin: The “Start-Up” menu first displays after power is applied to the ATRT-03/03A/03B.
c. Action Options:
Press key 1 to initiate a transformer test.
Press key 2 to set clock or select computer interface.
Press key 3 to calculate transformer turns ratio.
Press key 4 to run diagnostics.
Note:
Real time and date are shown on top left of LCD screen.
See section 11-1 for LCD contrast control.