Vanguard Instruments ATRT-03 - 25 Entering Transformer Identification for Test Record Menu; Table 25-1. Enter Transformer Identification for Test Record

Model ATRT-03 (v) Operating Instruction
80
25.0 Entering Transformer Identification for Test Record Menu
The following steps allow the user to enter transformer identification for test record.
Table 25-1. Enter Transformer Identification for Test Record
STEP DESCRIPTION DISPLAY ACTION
1 Select “Set Up” menu
1.TEST XFMR 04/12/00
2.SETUP 13:06:00
3.CALCULATOR
4.DIAGNOSTIC
Press key 2
2 Select “Enter Xfmr ID” menu
1.ENTER XFMR ID
2.REVIEW RECORD
3.SAV/RES RECORD
4.NEXT PAGE
Press key 1
3 Enter Company name
COMPANY:
Use 0-9 keys to
enter Company
name. Use “Enter”
key to confirm.
(Note)
4 Enter Substation name
STATION:
Use 0-9 keys to
enter Substation
name. Use “Enter”
key to confirm.
5 Enter Circuit name
CIRCUIT:
Use 0-9 keys to
enter Circuit
name. Use “Enter”
key to confirm.
6 Enter Manufacturer name
MANUFACTURER:
Use 0-9 keys to
enter Transformer
Manufacturer
name. Use “Enter”
key to confirm.