Vanguard Instruments ATRT-03 - 18 Restoring a Test Record to Thermal Printer; Table 18-1. Restoring a Test Record to Thermal Printer

Model ATRT-03 (v) Operating Instruction
53
18.0 Restoring a Test Record to Thermal Printer.
The following steps allow the user to restore a test record from FLASH EEPROM to the thermal
printer.
Table 18-1. Restoring a Test Record to Thermal Printer
STEP DESCRIPTION DISPLAY ACTION
1 Select “Set Up”
1.TEST XFMR 04/12/00
2.SETUP 13:06:00
3.CALCULATOR
4.DIAGNOSTIC
Press key 2
2 Select “Restore Record”
1.ENTER XFMR ID
2.REVIEW RECORD
3. RESTORE RECORD
4.NEXT PAGE
Press key 3
3 Select “Restore Record”
1.RESTORE RECORD
2.DIRECTORY
3.ERASE RECORD
Press key 1
4 Restoring a test record using record
number
RESTORE RECORD
1.ENTER RECORD NUMBR
2.SCROLL TO SELECT
Press key 1
5 Enter record number
RESTORE RECORD
NUMBER:
“ENTER” TO CONFIRM
Use key 0-9 to
enter record
number
6 Confirm record number
RESTORE RECORD
NUMBER:
“ENTER” TO CONFIRM
Press “ENTER”
key
7 Record recalled to memory
RECORD RESTORED!
Press any key
8 Select Print Record on thermal
printer
REVIEW RECORD
1.SCROLL TEST RECORD
2.PRINT TEST RECORD
Press key 2
9 Select Column format
PRINT FORMAT
1.COLUMN
2.DETAILED
Press key 1
10 ATRT-03 print test report
PRINTING REPORT
PLEASE WAIT
None