Vanguard Instruments ATRT-03 - Figure 22-2. Test Plan Loaded in Memory Menu; Test Plan Loaded in Memory Menu

Model ATRT-03 (v) Operating Instruction
73
22-2. Test Plan Loaded in Memory Menu
2 SNG PHS TAPS:2
TEST PLAN LOADED
1.CONTINUE
2.UNLOAD TEST PLAN
Figure 22-2. Test Plan Loaded in Memory Menu
a. Description: This menu indicates that Test Plan #2 is loaded in memory.
b. Origin: This menu is shown after the user pressed “ENTER” from menu shown in Figure 22-1.
c. Action Option: Press key 1 to use test plan. Press key 2 to run test without test plan.
Note:
The user can run a transformer test using this test plan to get “PASS or FAIL” results.
To start a new test without using the existing test plan, select “Unload Test Plan”.