Model ATRT-03 (v) Operating Instruction
32
a. Description: This menu allows the user to enter the H and X voltages of the transformer to be
used in the turns-ratio calculation. The user must enter the transformer nameplate line voltages.
b. Origin: H and X voltage data entry menu will appear if the user has pressed the YES key on the
Nameplate Voltage-Selection menu (see Figure 14-4).
c. Action Option: Press keys 0 thru 9 to enter transformer voltages. Press ENTER key to confirm
voltage entry. Press CLEAR key to re-enter input.
To Next Page
Loading...
