CTC II • Edition 01/2009
A2C59512809 © Continental Trading GmbH 13
For your safety
Installation instructions
1.6 Installation instructions
Power supply The test device may only be connected to the voltages
stipulated in these Operating Instructions.
Connection cables Ensure that no one can stumble over the cables.
Accessories Do not modify accessories in any way whatsoever! Never use
accessories or spare parts which have not been
recommended by the manufacturer - they can cause adverse
effects, operational disruptions and accidents.
1.7 Preserving the test stand's value
Maintenance and
repairs
The test device is sealed - only qualified customer service
personnel may maintain and repair it; also see Chapter 13.1
"Maintenance" on Page 85.
Control checks Check the test device (and the accessories) before using it.
Replace damaged parts immediately!
Cleaning Before cleaning the test device, disconnect the power supply.
Do not use any volatile solvents to clean the device, e. g.
alcohol, thinners, benzine and abrasive cleaning agents.
Danger of short-circuits!
Cables damaged by other objects can cause short-circuits,
adverse effects and malfunctions.
Replace damaged cables immediately!◄
Caution
The use of non-authorised accessories invalidates the
CE certificate of conformity!◄
Important
To Next Page
Loading...
