CTC II • Edition 01/2009
A2C59512809 © Continental Trading GmbH 23
General description
CTC II power supply
2.6.3 Charging the battery
: In the battery charger, the plug interior contains the
positive supply voltage while the plug exterior contains the
negative supply voltage.
Always use an original Continental battery charger to charge
the CTC II.◄
Important
1 Connect the battery charger to the CTC power supply
connection.
2 Connect the charger to a 230 V/ 50 Hz power outlet.
The CTC II's battery starts charging.
After two hours (max.) the battery is fully charged. During
charging, the CTC II is still available for other functions.◄
Important
To Next Page
Loading...
