VDO CTC II - Installation Data Programming

CTC II Tachograph programming
Operating Instructions Installation data
58 © Continental Trading GmbH A2C59512809
10.2 Installation data
Program Remark Value
K constant Enter: characteristic
coefficient "W"
Read: tachograph constant K
[imp/km].
• DTCO 1381: 2400 – 25000
• SE5000: 2000 – 64255
• SmarTach
®
: 2000 – 64255
• MTCO: 2400 – 25000
• SE2400: 2000 – 64255
N constant RPM constant
[imp/1000 revolutions].
• DTCO 1381: 2000 – 64000
• SE5000: 0 – 64255
• MTCO: 1000 – 64000
• SE2400: 1 – 64255
Wheel
circumference
Wheel circumference [mm]. DTCO, SmarTach
®
, SE5000:
1000 – 7200
Odometer 7-digit numbers
VIN 17-digit (max.) numbers or
letters
Drive shaft ppr Gearbox conversion factor
as specified by the vehicle
manufacturer.
0.001 – 64.255 imp/rev
Installation date Date of installation.
The SmarTach
®
sets the
current date as the
installation date
automatically when the VIN
has been changed during a
successful calibration
procedure.
Date format is dd.mm.yy.