VDO CTC II - Reading TCO Data; Writing TCO Data

CTC II • Edition 01/2009
A2C59512809 © Continental Trading GmbH 73
Tachograph programming
Saving TCO data
10.8.1 Reading TCO data
10.8.2 Writing TCO data
1 Select the "Read TCO data" menu and confirm.
The CTC II reads the tachograph type and parameters.
2 Press to return to the "Save TCO data" menu.
Saved TCO data will be retained even if the test device's
power supply has been interrupted.◄
Important
You can only copy the saved TCO data to the same type of
tachograph.◄
Important
1 Select the "Write TCO data" menu and confirm.
The CTC II copies the parameters to the tachograph.
2 Press to return to the "Save TCO data" menu.