CTC II General description
Operating Instructions CTC II power supply
20 © Continental Trading GmbH A2C59512809
2.5.3 Reset function
The CTC II offers you a reset function for cancelling a running
program.
2.6 CTC II power supply
The CTC II can be operated either by means of the vehicle
power supply or the integrated rechargeable battery.
Start the CTC II by
• connecting it to the vehicle power supply. The basic
menu will start automatically.
• pressing any key (battery operation). The CTC II starts
and the basic menu is displayed.
1 Press , and one after another.
2 Then press again.
The CTC II cancels the running program and restarts
automatically. The basic menu is displayed.
Only programs and settings that are available for the
connected tachograph are displayed, see Chapter 2.8
"Program overview (menu tree)" on Page 26.◄
Important
To Next Page
Loading...
