CTC II Settings
Operating Instructions
30 © Continental Trading GmbH A2C59512809
3 Settings
The periodic inspection procedure of tachographs may vary
due to country-specific regulations.
The standard program of the CTC II complies with the legally
prescribed tachograph inspection in Germany - an inspection
procedure used in many other EU countries.
However, in France, Italy, Portugal and Belgium, national
regulations and the procedure itself differ somewhat. Your
VDO service partner can set up the relevant CTC II programs
via the Adjustments menu.
You can make the following settings:
• Function: stationary/ mobile
• Language
• Auto off; also see Chapter 2.6.2 "Battery operation" on
Page 22.
• Info.
You can get more information on this from your VDO service
partner.◄
Important
To Next Page
Loading...
