VDO CTC II - Error Memory Management

CTC II Tachograph programming
Operating Instructions Error memory
70 © Continental Trading GmbH A2C59512809
10.7 Error memory
10.7.1 Displaying the error memory
10.7.2 Deleting the error memory
For detailed information about the data stored in the
tachograph's error memory please refer to the relevant
Technical Product Manual.◄
Important
1 Select "Error memory > Display err memory" and confirm.
The CTC II reads the error memory.
2 Press or to scroll through the error memory.
– MTCO 1324 display:
> error code
> symbol "active error".
– Digital tachograph display:
> consecutive number
> memory code (DTCO 1381) or error code (SE5000/
SmarTach
®
)
> number of errors
> symbol "active error".
3 End the program.
1 Select "Error memory > Display err memory" and confirm.
The CTC II reads the tachograph type and error memory.
2 Press to delete the error memory.
Remark:
You can only delete inactive errors. Active errors and the
"legal error" error memory cannot be deleted.
3 End the program.