CTC II Device testing
Operating Instructions Odometer test
50 © Continental Trading GmbH A2C59512809
7.3 Odometer test
Testing the accuracy of the odometer over a distance of
1,000 m.
The tests runs completely automatically
Current reading Final reading
Fig. 4: Odometer test (the MTCO 1324 is pictured)
1 Press to start the "Test device" menu.
The CTC II reads the tachograph type and the K value.
2 Press to start the test.
The CTC II drives the tachograph at a speed of 100 km/h,
(85 km/h for digital tachographs).
3 Compare the actual distance to the target distance.
The actual value must lie between 990 and 1010.
To Next Page
Loading...
