CTC II General description
Operating Instructions CTC II power supply
22 © Continental Trading GmbH A2C59512809
2.6.2 Battery operation
Auto off Select Adjustments > Auto off to specify the period of time
(after the last operation) that the CTC II will wait before
automatically entering "Sleep Mode".
Restarting When the CTC II is in "Sleep Mode", press any key to restart
it. The menu that was used last (before "Sleep Mode" was
activated) is displayed.
In battery operation, the Automatic measured track function
(road measurement) is not available for the CTC II.◄
Important
The " " battery symbol in the CTC II's display indicates
battery operation. It does not indicate the battery status.◄
Important
Starting the CTC II
1 Press any key to start the CTC II.
The CTC II starts. The basic menu is displayed.
Switching off
2 Select the "Switch CTC off" menu and confirm.
Power consumption increases when the CTC II enters "Sleep
Mode", quickly exhausting the battery.
Always switch the device off via the Switch CTC off menu -
this uses the full battery capacity.◄
Important
To Next Page
Loading...
