Veeder-Root TLS-300 - Annual Test; Monthly Test

8-3
8 In-Tank Leak Tests Leak Test Frequency
ANNUAL TEST
To run the tests annually, press CHANGE and press ENTER in response to the ON DATE message:
The system displays the message:
Press STEP to continue setting the annual test. The system displays the message:
To set the date of the annual test, press CHANGE until the month during which you want to perform the test
appears, and press the Right Arrow key. Press CHANGE until the week during which you want to perform the test
appears and press the Right Arrow key. Press CHANGE until the day on which you want to perform the test
appears. Press ENTER to confirm the date:
For example, if you chose to run the tests on the Friday of the first week of June, the system would display the
message:
Press STEP to continue. The system displays the START TIME message. Follow the procedure under “Leak Test
Start Time” on page 8-7.
MONTHLY TEST
To run the tests monthly, press CHANGE twice, then press ENTER in response to the ON DATE message:
The system displays the message:
Press STEP to display the message:
To set the date of the monthly test, press CHANGE until the week during which you want to perform the test
appears and press the Right Arrow key. Press CHANGE until the day on which you want to perform the test
appears. Press ENTER to confirm the date:
TEST ALL TANK:
ON DATE
ANNUALLY
PRESS <STEP> TO CONTINUE
TEST ANNUALLY: ALL TANKS
JAN WEEK 1 MON
MONTH WEEK DAY
PRESS <STEP> TO CONTINUE
JUNE WEEK 1 FRI
PRESS <STEP> TO CONTINUE
TEST ALL TANK:
ON DATE
MONTHLY
PRESS <STEP> TO CONTINUE
TEST MONTHLY: ALL TANKS
WEEK 1 MON
WEEK DAY
PRESS <STEP> TO CONTINUE