17 Reconciliation Setup Remote Report Format
17-4
Press STEP. The system displays the message:
Press CHANGE. Enter the number of gallons (litres) of allowable variance. Press ENTER. The system confirms
your entry with the message:
Press STEP to continue.
Remote Report Format
If necessary, press STEP until you see the message:
NOTE: This feature appears only when a remote printer is installed.
You can choose between ROW and COLUMN printer formats. To maintain the default or current setting, press
STEP. (The system displays the MODIFY TANK/METER MAP message.)
To change the default or current setting, e.g., from ROW to COLUMN, press CHANGE, then press ENTER. The
system confirms your entry with the message:
Press STEP to continue.
Temp Compensation
If necessary, press STEP until you see the message:
This feature allows you to choose whether or not to calculate Business Inventory Reconciliation (BIR) volumes
using the Programmable Temperature Compensation (TC) value. For information on entering this value, (See
“Temperature Compensation Value” on page 13.). Select STANDARD (the default) if the meters are not
temperature compensated. Select TC VOLUME if the meters are temperature compensated (the calculation of all
BIR volumes will be based on the TC value).
Press STEP to accept STANDARD. Press CHANGE, then ENTER to select TC VOLUME. The system confirms
your choice with the message:
PERIODIC RECONCILIATION
ALARM OFFSET: 000130
ALARM OFFSET: XXXXXX
PRESS <STEP> TO CONTINUE
REMOTE REPORT FORMAT
SELECT: ROW
SELECT: COLUMN
PRESS <STEP> TO CONTINUE
TEMP COMPENSATION
STANDARD
TC VOLUME
PRESS <STEP> TO CONTINUE
To Next Page
Loading...
Need help?
General
