5 System Setup Inventory Alarms Threshold Units
5-28
Press CHANGE:
Press ENTER:
Press STEP:
If Delivery Override is desired, press CHANGE, otherwise, press STEP.
Press ENTER:
Press STEP:
If necessary, press STEP until you see the message:
Press ENTER, CHANGE and then enter the three alpha-character country code. Default is blank.
Inventory Alarms Threshold Units
If necessary, press STEP until you see the message:
This feature lets you change the alarm threshold unit type configuration for the following group of five inventory
alarms to the units you select here.
Note: Changing the alarm inventory unit type configuration will set all inventory alarm thresholds to zero for all
tanks. If the inventory alarm unit type configuration is custom, changing an inventory alarm’s unit type will set the
alarm thresholds for that alarm type to zero for all tanks.
ENABLED
PRESS <STEP> TO CONTINUE
DELIVERY OVERRIDE
DISABLED
Menu will only appear if Service Notice is enabled and there is
a probe module
ENABLED
PRESS <STEP> TO CONTINUE
ISO 3166 COUNTRY
PRESS <ENTER>
This feature is an international option.
INVENTORY ALARMS UNITS
CONFIG: STANDARD
To Next Page
Loading...
Need help?
General
