EasyManua.ls Logo

VeEX MTX150x Lite - Lithium Polymer Battery Handling & Storage Advice; Optical Connectors

VeEX MTX150x Lite
148 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Safety Information © VeEX Inc. All Rights Reserved. 12
l
STOP the charging process and disconnect battery immediately
l
Disconnect battery from the device immediately.
l
Place it in an open non-flammable area.
l
Watch it for approx. 30 minutes from a safe distance.
l
Follow proper procedure to dispose of battery, according to local laws or ordinaces.
l
After impact, drop or high shock, check the product for dents, punctures or cracks on its back.
Do not leave the product unattended while charging, after a high impact event.
Lithium Polymer Battery Handling & Storage Advice
l
Keep LiPo battery packs out of reach of children or pets.
l
ALWAYS store equipment containing Li-Po batteries in cool, dry places between 40-80° F (below 0C
or above 50C).
l
Do not put battery packs in pockets or bags where they can short circuit.
l
Do not store or transport batteries where they can come into contact with sharp or metallic objects.
l
The speed at which a LiPo battery ages during storage is based on both storage temperature and
state of charge. For optimum battery life always store your LiPo’s partially charged at room tem-
perature. This will maintain their performance levels over time and there’s no need to cycle them
unless stored for periods longer than 3-6 months.
l
Never store a RC LiPo in a hot car fully charged for an extended period of time, this will cause dam-
age.
l
When storing batteries for extended periods, store at a half charged state.
Optical Connectors
The test sets display a laser warning icon when the laser source is active to alert the user about a potentially
dangerous situation. It is recommended to:

Table of Contents

Related product manuals