99 © VeEX Inc. All Rights Reserved. Platform Functions
l
Time Out: Time-to-Live (TTL) in milliseconds. Enter the maximum time allowed (in ms, up to 99999
ms) between an ICMP ping and echo response.
Once the parameters are configured, press Start to begin the test.
Ping Results
Pressing Ping will take you to the Result tab and start the Ping test.
Ping Result
l
Destination: Indicates the destination IP address.
l
Ping status: In Progress, PASS, or FAIL.
l
Sent, Received, Unreach, Missing: Number of pings sent, received, unreached or missing. A Ping
is counted missing if no response is received before timeout. A Ping is counted unreached if an echo
response is received with host unreachable set. Ping also estimates the round-trip time in mil-
liseconds.
l
Current: The current time for a Ping request to be answered.
l
Average: The average time recorded for a Ping request to be answered.
l
Max: The maximum time recorded for a Ping request to be answered.
l
Min: The minimum time recorded for a Ping request to be answered.
To Next Page
Loading...
