Vertical summit - Alternative Route Selection(ARS) for Digit Conversion Table104

Summit & Summit 800
Feature Description and Operation Manual Issue 1.2
104
2.32 Alternative Route Selection(ARS) for Digit conversion
table
Description
This feature is enabled if there are several paths in order to connect toward a destination System
when a user use digit conversion feature.
If a selected path is not available for some reason (All Busy, Line Fault, etc) after digit conversion,
Alternative Route Selection (ARS) will connect calls using predefined designated path in digit
conversion table.
Operation
If set, Alternative Route Selection operation is automatic.
Conditions
1. ARS is optional and ARS digit in digit conversion table must be programmed to be
operational.
2. ARS digits should be contained in the CO Group Access Code
3. ARS can be used in coordination with Last Number Redial, Station Speed Dial, and
System Speed Dial.
Programming
Keyset Admin.
SYSTEM
Digit conversion Table (PGM 270)
STATION
Digit conversion table index(114-Button 24-Button10)
CO
Digit conversion table index (141-Button20)
Web Admin.
TABLE DATA
Digit conversion Table (PGM 270)
STATION DATA
Common Attribute

Digit conversion table
CO LINE DATA Common Attribute Digit conversion table index
Related Features
Hardware