Vertical summit - Call Forward, Attendant

Summit & Summit 800
Feature Description and Operation Manual Issue 1.2
397
6.6 Call Forward, Attendant
Description
As with other stations, Attendants can forward calls to other stations in the system. Calls may be
forwarded unconditionally, on busy or no answer.
Operation
Attendant
To activate Call Forward
1. Lift the handset or press the [SPEAKER] button to receive intercom dial tone.
2. Press the [FWD] button.
3. Dial ‘0’ ~ ‘5’, the Call Forward type.
4. Dial the station number to receive forward calls.
To deactivate Call Forward
1. While idle, press the [FWD] button.
Or,
1. While Off-hook, press the [FWD] button.
2. Dial ‘#’.
Condition
1. The Conditions of the Call Forward feature apply.
2. If the System Attendant activates Unconditional Call Forward, the receiving station will
receive Attendant calls and recall ring. In addition, if the receiving station is an iPECS
IP or LDP Multi-button Phone, the receiving station will be able to activate features
normally reserved for a Main Attendant.
3. The system requires at least one Attendant be available at all times. The last available
Attendant cannot activate Call Forward to an Attendant that has activated the Alternate
Attendant feature.
Programming
Keyset Admin.
STATION Call Forward (PGM 111-Button 2)
Station Call Forward No Answer Timer (PGM 123-Button 1)
SYSTEM
System Attendant (PGM 164-Button 1)
Main Attendants Assignment (PGM 164-Button 2~4)
Web Admin.
STATION DATA Common Attributes Call Forward
Station Timers

Station Forward No Answer Timer
SYSTEM DATA
Attendant Assignment

System Attendant, Main Attendant
Related Features
 Call Forward
 Alternate Attendant
Hardware
 iPECS IP or LDP Multi-button Phone, a 24-button phone is recommended