Vertical summit - Remote Devices

Summit & Summit 800
Feature Description and Operation Manual Issue 1.2
276
2.86.3 Remote Devices
Description
Remote devices, in particular those not reachable by the system, are managed by grouping
devices with similar characteristics in a Zone. Placing devices into Zones simplifies management
allowing definition of common characteristics to the devices within the zone. Zone attributes
include:
 Nation code
 Language
 Page area
 Time-zone, GMT or system
 Holiday ring modes
 RTP relay
 RTP Relay group.
Operation
Zone operation is automatic once configured.
Conditions
1. Zone attributes which may affect ringing, such as Holiday and Vacation settings, have
lower priority than other ring assignments such as Tenancy group ring mode
established for DID lines.
2. Zone Attributes do not provide adjustment of time for DST.
3. It is recommended to assign outside Lines and stations of a Tenant group in the same
Device Zone.
4. Wake-up time is based on the time displayed in the station’s LCD.
Programming
Keyset Admin.
ZONE DATA
Device Zone Number (PGM436-Web only)
Device Zone Attributes (PGM 437-Web Only)
Zone Access & Page Relay (PGM 438-Web only)
Zone Attributes (PGM 439-Web only)
Zone RTP Relay Group (PGM 440-Web only)
Inter-zone Attributes (PGM 441-Web only)
Zone Holiday Assignment (PGM 444)
Web Admin.
ZONE DATA Device Zone Number
Device Zone Attributes
Access & Page Relay
Zone Attributes
Zone RTP Relay Group