Summit & Summit 800
Feature Description and Operation Manual Issue 1.2
289
3.9 Intercom Transfer
Description
You can transfer an active Intercom call to other stations in the iPECS system. Intercom calls can
be transferred after announcing the call (screened) or without announcing the call (unscreened).
The Intercom station is placed on Exclusive Hold. The Transfer Recall Timer is initiated and, if
this timer expires before the Intercom call is answered, the call will recall your station until
answered or abandoned.
Operation
iPECS IP & LDP Phones
To perform a Screened ICM transfer, while on an ICM call
1. Press the [TRANS/PGM] button.
2. Dial the station to receive call.
3. At answer or Splash tone, announce call.
4. Hang-up, return to idle.
Or,
1. Press the {DSS/BLF} button for the desired station.
2. At answer or Splash tone, announce call.
3. Hang-up, return to idle.
While on an Intercom call, Unscreened call transfer
1. Press the [TRANS/PGM] button.
2. Dial Station to receive call.
3. Hang-up, return to idle.
Or,
1. Press the {DSS/BLF} button for the desired station.
2. Hang-up, return to idle.
SLT
To perform a Screened transfer of an active Intercom call
1. Momentarily depress the Hook-switch.
2. Dial Station to receive call.
3. At answer or Splash tone, announce call.
4. Hang-up, return to idle.
To Next Page
Loading...
