Summit & Summit 800
Feature Description and Operation Manual Issue 1.2
13
2.6 Auto Call Release
Description
Outside or intercom calls (except Hands-free Answerback), will be released automatically if you
do not complete dialing or, for intercom calls, the called party does not answer after a pre-
determined time.
Operation
System
Auto Call Release of Intercom calls:
1. If you place an intercom call and the called station does not answer in the Intercom Call
Release Time, the call is terminated and you will receive error tone.
Auto Call Release of outside calls:
1. If you seize an idle Line and do not dial within the Automatic Release Time, the call is
terminated and you will receive error tone.
Conditions
1. If the Automatic Call Release Timer is set to “0”, Auto Call Release is disabled.
2. When the handset is used to place a call, you will receive error tone for 30 seconds
followed by 30 seconds of Howler tone and the station is placed in a fault mode. If on-
hook dialing is used, you receive error tone for one (1) second and the phone returns
to idle automatically.
Programming
Keyset Admin.
To Next Page
Loading...
