Summit & Summit 800
Feature Description and Operation Manual Issue 1.2
321
4.11 IP Address Dialing
Description
If allowed, you can place calls using an IP path. The system accepts user dialed digits as the IP
address for the called party. When dialing an IP call, the asterisk, “*”, is used as the “dot” between
bytes of the IP address.
Operation
iPECS IP & LDP Phones
To place an IP Call
1. Lift the handset or press the [SPEAKER] button.
2. Press the {IP Line Group} button or dial IP Group access code.
3. Dial “xxx * xxx * xxx * xxx”, use “*” as the dot in the IP address.
4. Press “#” to complete dialing.
SLT
To place an IP Call
1. Lift the handset.
2. Dial the IP Group access code.
3. Dial ‘xxx “*” xxx “*” xxx “*” xxx‘, use “*” as the dot in the IP address.
4. Press “#” to complete dialing.
Conditions
Programming
Keyset Admin.
To Next Page
Loading...
