Summit & Summit 800
Feature Description and Operation Manual Issue 1.2
145
7. If there is a single match, the called is transferred. If multiple matches exist, the system
plays prompts for each with a selection digits below:
“for [subscriber name], press 1”
“for [subscriber name], press 2”
…
“for [subscriber name], press 9”
8. When the caller enters the desired digit, the system routes the caller to that station
Conditions
1. To be searched in company directory, the Station user name must be recorded and the
first and last name also must be programmed properly.
Programming
Keyset Admin.
VSF Access (PGM 113-Button 2)
Company Directory First Name (PGM 127-Button 5)
Company Directory Last Name (PGM 127-Button 6)
Web Admin.
STATION DATA VM Attributes VSF Access, Company Directory - First
Name, Company Directory - Last Name
Related Features
CCR
Integrated Auto Attendant
Hardware
2.47.2.2 Remote Announcement Recording
Description
An outside caller can be allowed to record a System announcement. This capability is often used
in schools or other organizations to allow remote recording of school closing. The administrator
calls the Auto Attendant and dials the digit assigned for remote recording in the CCR Table.
Note that this should not be included in the Auto Attendant announcement for security purposes.
The administrator enters the System Attendant password then can record any System
announcement desired as shown in the Operation section.
To Next Page
Loading...
