Vertical summit - 2.39 Flexible Numbering Plan

Summit & Summit 800
Feature Description and Operation Manual Issue 1.2
124
2.39 Flexible Numbering Plan
Description
Your access to the iPECS system resources and features is accomplished through feature codes
or Flexible buttons on your iPECS IP or LDP Phone. The Administrator selects from one of the
eight (8) different standard numbering plans and, if desired, assigns codes for individual functions
in the Flexible Numbering Plan. The feature codes are defined in the system’s Flexible
Numbering Plan; refer to the Summit Administration and Programming Manual.
Operation
System
System implements feature activation based on the Flexible Numbering Plan.
Conditions
1. Feature codes can be one to three digits in length.
2. During programming, conflicts in the Numbering Plan are not allowed. The existing
non-conflicting Numbering Plan is used until correctly updated.
Programming
Keyset Admin.
SYSTEM ID
System Id (PGM 100-Button 4)
NUMBERING Flexible Station Numbering Plan (PGM 105)
Flexible Numbering Plan (PGM 106 – 109)
Web Admin.
SYSTEM ID &
NUMBERING PLANS
System ID
Flexible Station Number
Flexible Numbering Plan
Related Features
Hardware