Summit & Summit 800
Feature Description and Operation Manual Issue 1.2
11
Outside Line Access
Temporary Station COS (Class of Service)/Lock
Walking COS (Class of Service)
Call Forward
Station User Programming & Codes
Hardware
2.5 Auto Call Recording
Description
Your iPECS IP or LDP Phone can be configured to automatically record calls to a Voice Mailbox
or the hard disk drive of UCS Client soft phone. The type of calls recorded can be set as None,
All calls or outside Line calls only.
When recorded to a mailbox, you manage the recording through your Voice Mailbox. For
recordings to UCS Client, recordings are managed directly by UCS Client with the ability to listen
to, delete or send the recording to others via e-mail.
Operation
Recording of calls is automatic when assigned.
To manage the recordings, use the procedures outlined in UCS Client User Guide.
Conditions
1. UCS Client can record one call at a time and must be idle. While recording, if UCS
Client places or receives a call, recording terminates.
2. When call recording begins, you and the connected party will receive a Call Recording
confirmation tone.
3. UCS Client used for recording must be operating in a ‘Local’ mode not remote.
Programming
Keyset Admin.
STATION Two-way Record Privilege (PGM 112-Btn11)
Auto Call Recording (PGM 112-Button 20)
To Next Page
Loading...
