Summit & Summit 800
Feature Description and Operation Manual Issue 1.2
10
match the LDT table digits, the system will send second dial tone to request that you
input a valid Authorization code.
7. An Authorization code may include any dial pad digit except “*” and “#”.
8. Duplicate or conflicting System Authorization codes are not allowed when using the “*”
and code operation. For example, code “*1234” conflicts with code “*123” and cannot
be recognized as a unique code. Since the index operation employs the Table index
and the station number forms part of the Station code, codes cannot be duplicated and
conflicts will not occur.
9. Use of Authorization codes varies based on the system Nation Code. In some regions,
particularly the US and UK, a System Authorization code may be required for DISA
access. Entering a Station code on a DISA line will fail in these areas. In other regions,
a System Authorization code can be used with Walking COS (Class of Service).
10. The system can be configured to require an End of Entry code or simply “End Code”. If
“End Code” is enabled, you must enter “#” after entry of the Authorization code.
Programming
Keyset Admin.
STATION Station Account (PGM 112-Button 19)
CO/IP Group Authorization (PGM 141-Button 8)
SYSTEM DISA Retry Counter (PGM 160-Button 5)
AUTH Retry Count (PGM 160-Button 16)
Old Auth Code Usage (PGM 161-Button 16)
SYSTEM DATA System Attributes DISA Retry Count, AUTH Retry Count, Simple
Auth Code Usage, COS 7 When Auth Fail,
To Next Page
Loading...
