Related Features
Hardware
2.79.2.14 Networked System Paging
Description
You may have access to the Page Zones of other systems in the network. A warning tone is
provided, if assigned in the networked system, and then you are connected to the Page Zone.
The conditions such as Page Time-out of the networked system will apply to your page.
You can access and make page announcements to stations and external zones of a networked
system by dialing a pre-programmed number or with a Flex button just as if the page was within
the same system.
Operation
iPECS IP or LDP Phone
To assign a Flex button to access a Page Zone in Networked system:
[TRANS/PGM] + {Flex Button} + Net Numbering Plan code for Page + [HOLD/SAVE]
To Page a Networked system Zone:
1. Lift the handset.
2. Dial the Network Paging code and Zone, or press a {NET PAGE ZONE} button.
3. If assigned, after the Page Warning Tone, make announcement.
4. Replace the handset to return to idle.
To queue for a page when busy is received.
1. Press the[MESSAGE/CALL BACK] button.
2. Replace the handset, returning to idle.
SLT
To make a page,
1. Lift the handset.
2. Dial the Network Paging code and Zone.
3. If assigned, after the Page Warning Tone, make announcement.
4. Replace the handset, to return to idle.
To Next Page
Loading...
