Vertical summit - 2.22.4 Multi-Party Conference

Summit & Summit 800
Feature Description and Operation Manual Issue 1.2
81
 Hold Recall
Hardware
2.22.4 Multi-Party Conference
Description
You can join multiple internal and external parties in a single call as a conference. You can join
a maximum of thirteen (13) parties can be in a conference with a maximum of two such
conferences simultaneously. There is no limit on the number of 3-party conferences.
You can place a Conference on hold, allowing you to accomplish other tasks while permitting the
other parties to continue to converse.
Operation
iPECS IP & LDP Phones
To establish an ad-hoc conference
1. Establish the first call.
2. Press the [CONF] button. The LED will light, the connected party is placed on exclusive
hold and you receive dial tone.
3. Place the second call.
4. When connected, press [CONF], the new call is placed on exclusive hold.
5. Repeat Steps 3 and 4 above to add additional conference parties.
6. Press the [CONF] button to establish conference.
To place a conference on hold
1. Press the [HOLD/SAVE] button, the [CONF] button LED will flash.
To retrieve held conference
1. Press the flashing [CONF] button, all parties reconnected.
SLT
To establish an ad-hoc a conference
1. Establish the first call.
2. Momentarily press the hook-switch, the connected party is placed on exclusive hold and
you receive dial tone.
3. Place the second call.
4. When completed adding parties, momentarily press hook-switch twice in 2 seconds to
connect all parties.