Summit & Summit 800
Feature Description and Operation Manual Issue 1.2
308
3.13 Emergency page
Description
If a station makes a Emergency page, the station can page to not only idle stations and external
page ports but also talking stations.
When the Emergency page is starting, the talking stations disconnect the current call and receive
the emergency page.
Except that the Emergency page can page to talking stations, the Emergency page is equal to All
Call Page.
Flexible buttons may be assigned to make a emergency page as a {Emergency Page} button.
Operation
To assign a Flex button as a {Emergency Page} button
[TRANS/PGM] + {FLEX} + Emergency Page code + [HOLD/SAVE]
To make a page,
1. Lift the handset.
2. Dial the Emergency Page code or press a {Emergency Page} button.
3. If assigned, after the Page Warning Tone, make announcement.
4. Replace the handset to return to idle.
Conditions
Programming
Common Attributes Page Access
SYSTEM DATA
Common Attributes Privacy Warning Tone
External Control Contacts
System Timers Paging Timeout Timer
To Next Page
Loading...
