Summit & Summit 800
Feature Description and Operation Manual Issue 1.2
62
2.17 Call Park
Description
You may place an active Internal & External call in a special holding location called a Park Orbit
for easy access from any station in the system. There are 19 (Summit) & 200 (Summit 800) Park
Orbits allowing multiple calls to be parked simultaneously.
Operation
iPECS IP & LDP Phones
To park an active Internal & External calll
1. Press the [TRANS/PGM] button.
2. Dial the Park Orbit number (Summit: #601~#619 / Summit 800#601~#800).
3. Return to idle.
To retrieve a parked call
1. Lift the handset or press the [SPEAKER] button,
2. Dial the Park Orbit number (Summit: #601~#619 / Summit 800#601~#800).
SLT
To park an active Internal & External call
1. Momentarily press the hook-switch.
2. Dial the Park Orbit number (Summit: #601~#619 / Summit 800#601~#800).
3. Return to idle.
To retrieve a parked call
1. Lift the handset.
2. Dial the Park Orbit number (Summit: #601~#619 / Summit 800#601~#800).
Conditions
1. If the selected Park Orbit returns a busy signal, the user may simply dial another Park
Orbit without the need to disconnect.
2. A Parked call will recall to the station that parked the call should the Call Park Timer
expire. The normal Hold Recall process is then initiated.
3. A Parked call will indicate busy at all appearances.
Programming
Keyset Admin.
To Next Page
Loading...
