Summit & Summit 800
Feature Description and Operation Manual Issue 1.2
396
Operation
Attendant
To activate an Attendant Station User Program Code feature or function
1. Press the [TRANS/PGM] button, the Station Program Menu is displayed.
2. Dial “0” to access the Attendant Station Program codes.
3. Enter desired code or use the [VOL UP]/[VOL DWN] button to display the desired menu
item and enter the desired code.
4. Dial additional inputs, if required.
Condition
Programming
Keyset Admin.
System Attendant (PGM 164-Button 1)
Main Attendants Assignment (PGM 164-Button 2~4)
Attendant Assignment System Attendant, Main Attendant
Related Features
SMDR (Station Message Detail Recording)
Traffic Analysis
Temporary Station COS (Class of Service)/Lock
Authorization Codes (Password)
System Clock Set
Pre-defined & Custom Text Display Messages
Integrated Auto Attendant/Voice Mail
Dial-by-Name
Auto Service Mode Control
Back Ground Music
Station User Programming & Codes
Hardware
iPECS IP or LDP Multi-button Phone, a 24-button phone is recommended
To Next Page
Loading...
