Vertical summit - Page 145

Summit & Summit 800
Feature Description and Operation Manual Issue 1.2
134
3. Dial the line number.
SLT
To place a call on Exclusive Hold
1. Momentarily press the hook-switch.
2. Dial “560”, the System Hold feature code.
To access a call from System Hold
1. Lift the handset.
2. Dial “8#”, the Held Call Access code.
3. Dial the line number.
Conditions
1. When an outside Line is placed on System Hold, the button LED will flash at 30 ipm
and wink at the holding station and will flash at all other stations.
2. A call on System Hold can be retrieved from any station allowed access to the Line in
the system database using the Line button or the Held Call access code.
3. The LED of {LOOP} and {POOL} buttons will display the active outside Line status.
Programming
Keyset Admin.
SYSTEM
Hold Preference (PGM 160-Button 7)
Attendant Recall Timer (PGM 180-Button 1)
I-Hold Recall Timer (PGM 180-Button 5)
System Hold Recall Timer (PGM 180-Button 6)
Web Admin.
SYSTEM DATA System Attributes Hold Preference
System Attributes Attendant Recall Timer, I-Hold Recall
Timer, System Hold Recall Timer
Related Features
 Call Transfer, Outside Line
 Hold Preference
 Hold Recall
 Exclusive Hold
Hardware