Vertical summit - Page 16

Summit & Summit 800
Feature Description and Operation Manual Issue 1.2
5
4. Press “*”.
5. Place the outside call as normal.
To enter an Account Code during a call:
1. Momentarily press the Hook-switch.
2. Dial the Flex Numbering Plan code “550”.
3. Dial the Account Code (up to 12 digits).
4. Press “*”.
Conditions
1. When entering an Account Code during a call, DTMF digits are transmitted to the
connected party.
2. A maximum of 1000 {ONE-TOUCH ACCOUNT CODE} buttons may be assigned in
the system.
3. If an Authorization Code is entered as the Account Code, the SMDR record will show
the station number or the index number for a System Authorization Code rather than
the user entered Authorization Code.
4. If the Forced SMDR Account Code attribute of the station is enabled, you must enter
an Account Code prior to placing an outgoing call.
Programming
Keyset Admin.
NUMBERING
Flexible Numbering Plan (PGM 106-Button 8)
STATION
Forced SMDR Account Code (PGM 113-Button 24-21)
Web Admin.
SYSTEM ID
&NUMBERING PLANS
Flexible Numbering Plan SMDR Account Code Enter
STATION DATA
Common Attributes

Forced SMDR Account Code
Related Features
 Authorization Codes (Password)
 SMDR (Station Message Detail Recording)
 Station Flexible Buttons
Hardware