Vertical summit - Page 18

Summit & Summit 800
Feature Description and Operation Manual Issue 1.2
7
Programming
Keyset Admin.
SYSTEM
Alarm Enable (PGM 163-Button 1)
Alarm Contact Type (PGM 163-Button 2)
Alarm/Doorbell Mode (PGM 163-Button 3)
Alarm Signal Mode (PGM 163-Button 4)
STATION
Alarm/Door Bell Attribute (PGM 113-Button 8)
Web Admin.
SYSTEM DATA Alarm Attributes Alarm Enable, Alarm Contact Type,
Alarm/Doorbell Mode, Alarm Signal Mode
STATION DATA
Common Attributes

Alarm/Door Bell Attribute
Related Features
 Door Open
Hardware
 iPECS IP or LDP Phone
 Alarm or Doorbell input contact, refer to the Summit Hardware Description &
Installation Manual to install.