Summit & Summit 800
Feature Description and Operation Manual Issue 1.2
371
Console starts from button 49, the 2
nd
starts from button 97, the 3rd Console starts
from button 145, 4th starts from button 193.
7. As a default, the 48 button Console is assigned with button Map 1 to 4 depending on
the position of the Console. The 12 button Consoles are not assigned a map.
8. If DSS configuration is changed and the phone restarts, programmed DSS data is
initialized from the changed DSS.
9. While idle, the [VOL UP]/[VOL DWN] buttons control the contrast of the LCD of both
the iPECS IP Phone and the LSS model serial.
10. Your station must be enabled to employ a Serial Console, if not enabled, any
connected console will not function.
Programming
Keyset Admin.
To Next Page
Loading...
