Summit & Summit 800
Feature Description and Operation Manual Issue 1.2
66
Operation
iPECS IP & LDP Phones
To assign a {PICK UP GROUP CALL PICK-UP} button
[TRANS/PGM] + {FLEX} + “588” + [HOLD/SAVE]
To Pick-up a call ringing at another station in the same Call Pick-up group
1. Lift the handset or press [SPEAKER] button.
2. Dial “588”, the Pick-Up Group Call Pick-up feature code.
Or, Press the {PICK UP GROUP CALL PICK-UP} button.
SLT
To Pick-up a call ringing at another station in the same Call Pick-up group
1. Lift the handset.
2. Dial “588”, the Pick-Up Group Call Pick-up code.
Conditions
1. Pick-Up Group Call Pick-up applies to stations within the same Pick-up Group and
does not apply to other types of Station Groups where Group Call Pick-up may be
used.
2. To pick-up an outside call, you must have an idle appearance button available.
3. When several calls are ringing simultaneously, Call Pick-up will connect the oldest
highest priority call (Ringing Line Preference, PGM 173 or System Data Ringing Line
Preference Priority).
4. Queue callback and Private Line calls are not subject to Call Pick-up and such
attempts receive error tone.
5. Hands free announced intercom calls cannot be picked up by another station. Only
ringing intercom calls are subject to Call Pick-up.
6. When a station belongs to multiple Pick-up Groups, calls to the group with the lowest
number are answered first.
7. A Station must have “Pick up by Button” enabled to use a Flex button for Pick-up
Group Call Pick-up.
Programming
Keyset Admin.
To Next Page
Loading...
