Safety precautions
1. Keep this manual throughout the life of the product.
2. Users should read this manual carefully before performing any operation on the product.
3. “Notices” and “Warnings” in this manual do not represent all safety precautions to be observed, but they are
only supplements to various operational safety precautions.
4. This product is professional equipment, used in industrial, commercial or other professional occasions, not to
the general public.
5. This product is only used for the purpose of its design. The manufacturer will not bear any responsibility for
incorrect use.
6. The key provided by the product must be kept by the person responsible for maintenance.
Electrical safety
Dangerous voltage
Some components of the system carry dangerous voltage in operation. Direct contact or indirect contact
through moist objects with these components will result in fatal injury.
Safety rules in the industry must be observed for installation of the AC power supply. The installation personnel
must be licensed to operate high voltage and AC power.
Never wear a watch, bracelet, bangle, ring, or other conductive objects during operation.
When water or moisture is found on the cabinet, turn off the power immediately. In a moist environment,
precautions must be taken to keep moisture out of the power supply.
In the installation process, a prohibition signboard must be put on the operating switch and button.
High voltage construction operation may cause fire or electric shock. Areas for connection and wiring of
AC cables must be in compliance with the local rules and regulations.Only those who are licensed to
operate high voltage and AC power can perform high voltage operations.
High contact current must be grounded before power connection.
In high voltage and AC operation, special tools must be used. No common or self-carried tools should be
used.
To Next Page
Loading...