Vertiv™ | Liebert® SRC-G | User Manual
23
Mechanical Installation
Step 2: Rigidly mount the mounting brackets with reference to the expansion bolts, refer Figure 2-12 for better
understanding.
Figure 2-12 Placement of Bottom Mounting Bracket
Step 3: After successfully mounting all the supporting brackets, check the mounting is rigid to sustain the load
of indoor unit; then place the indoor unit with the standard lifting tools for example ‘forklift’. It is recommended
installation should be carried out only by trained professionals.
All the illustration are for reference only, the actual site mounting may dier as per requirement,
consult Vertiv professional before installation.
To Next Page
Loading...
Need help?
General
