Vertiv NetSure 7100 Series Installation Manual

Vertiv | NetSure 7100 Series -48V DC Power System Installation Manual (IM582127000) | Rev. BB
39
Installing a Battery Tray Mounting Kit, P/N 565004 (Enclosure Installation Only)
Perform the following procedure to install a 582127000 List 93 Battery Tray into an enclosure.
DANGER! The enclosure must be securing anchored to the floor before the battery tray is installed.
Removing the Enclosure Rear and Side Panels
Procedure
1. Refer to Removing the Enclosure Rear Panels and Removing the Enclosure Side Panels starting on Page
17.
Installing a Battery Tray Mounting Kit P/N 565004
Procedure
1. To install a Battery Tray Mounting Kit, perform the procedure in Figure 17.

Vertiv NetSure 7100 Series Specifications

General

Brand	Vertiv
Model	NetSure 7100 Series
Category	Power Supply
Language	English