Vertiv NetSure 7100 Series Installation Manual

Vertiv | NetSure 7100 Series -48V DC Power System Installation Manual (IM582127000) | Rev. BB
188
Installing and Connecting Batteries in List 93 Battery Tray (if furnished) (for system
mounted in a relay rack)
Important Safety Instructions
DANGER! Adhere to the “Important Safety Instructions” presented at the front of this document.
Battery Manufacturer Information
Refer to System Application Guide SAG582127000 for specifications and manufacturers of the batteries to be
installed in this power system.
Installing Battery Landing Busbar Kit P/N 553584 (List 21) or 555478 (List 22, 23, or 24)
DANGER! Adhere to the “Important Safety Instructions” presented at the front of this document.
If the battery tray(s) was ordered with the system, these kits were installed at the factory. If a battery tray is
installed in the field, customer must install the kit.
Procedure
1. Refer to Figure 113 or Figure 114 and install the Battery Landing Busbar Kit.

Vertiv NetSure 7100 Series Specifications

General

Brand	Vertiv
Model	NetSure 7100 Series
Category	Power Supply
Language	English