Vivotek ND8422P - Camera - Schedule

VIVOTEK - Built with Reliability
User's Manual - 151
The camera recording schedule can be congured down to an hourly basis. The default settings
for cameras is to record videos at all time.
To set up a schedule,
1. Select a camera from the list using a single mouse click,
2. By default, all days and hours will be selected for continuous recording. If you want to disable
recording for specic time during a week, or enable event-triggered recording during some
time, use the Event recording and No recording buttons.
3. Use them as a paint brush or eraser on the weekly time chart. Click or drag your mouse
cursor across the time chart to change the recording schedule.
Change a non-recording hour to continuous recording by one click on the Continuous
recording button and then click and/or drag on the time chart.
5-3-4. Camera - Schedule
1
2
3
- or -
The color codes for the display on the time chart are shown below:
Continuous recording
Event recording
No recording