EasyManuals Logo

Vivotek ND8422P User Manual

Vivotek ND8422P
198 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
VIVOTEK - Built with Reliability
User's Manual - 7
Safety
Connect the system to an earthed main power outlet.
Never open the housing of the power supply unit.
Install and operate the system only in a dry, weather-proof location.
Observe the following safety factors:
Is there visible damage to the system or power cord?
Is the system operating correctly?
Has the system been exposed to rain or moisture?
Has the system been in a long storage under harsh conditions or exposed to
unconforming stress?
The relevant electrical engineering regulations must be complied with at all times during
installation.
Ensure that all maintenance and repair work is handled by qualified personnel such as
electrical engineers or network specialists.
Read this manual before installing or operating the system. The documentation contains
important safety instructions about permitted uses.
The rated AC input is: 100-240V~ 2.1A, 60-50Hz; the max. consumption: 120W (DC56V, 2.5A)
If a fault occurs, disconnect the power cord from the power supply.
Do not install the system close to heaters or other heat sources. Avoid locations with direct
sunlight.
All ventilation openings must not be blocked.
Use only the cables shipped with system or use appropriate cables that can withstand elec-
tromagnetic interference.

Table of Contents

Other manuals for Vivotek ND8422P

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Vivotek ND8422P and is the answer not in the manual?

Vivotek ND8422P Specifications

General IconGeneral
HDD capacity6144 GB
HDD interfaceeSATA
Maximum storage capacity12 TB
Number of HDDs supported2
DVI-I ports quantity0
USB 2.0 ports quantity3
Ethernet LAN data rates10, 100, 1000 Mbit/s
Power over Ethernet (PoE)Yes
Ethernet LAN (RJ-45) ports1
Power consumption (max)120 W
CertificationCE, LVD, FCC, VCCI, C-Tick, UL
LED indicatorsHDD, Power, Status, eSATA
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)0 - 95 %
Maximum resolution2560 x 1920 pixels
Alarm input channels8
Video input channels16 channels
Alarm output channels4
Video formats supportedH.264
Resolution at capture speed1920x1080@120fps
Minimum RAM2 GB
Weight and Dimensions IconWeight and Dimensions
Depth311 mm
Width360 mm
Height44 mm
Weight2700 g

Related product manuals